INTREPID Pullers puller sets

Heavy duty Three piece 3-leg gear pullers.

There are three sizes: 3", 4" and 6". Each puller has a long bolt with a pointed tip on one end and a hex grip on the handle for turning by hand or with a tool.

The claw legs are reversible for internal and external pulls, and may be adjusted using the nuts and bolts.

Dimensions:

3" puller:
Total length of claw legs: 3.5"
Length of bolt beneath yoke: 2.75"
Claw feet protrude inwards by 1/4"

4" puller:
Total length of claw legs: 4.5"
Length of bolt beneath yoke: 4"
Claw feet protrude inwards by 3/8"

6" puller:
Total length of claw legs: 6.5"
Length of bolt beneath yoke: 5 1/8"
Claw feet protrude inwards by 1/2"

Specification

Forged steel pullers in 3 sizes
Heavy duty construction
Chrome plated 3", 4" and 6" long

Packed weight for these pullers is over 2kgs

£18.99 PAPS01

p&p £8.50 Total 27.49

Professional 2 and 3 Leg Fine Thread 7'' Inch Pulls with reversible legs for external and internal pulling

A very unique puller. Not only 2 and 3 leg position it is also reversible for both internal and external pulls.

Manufactured for drop forged steel of the highest quality. The extra fine thread on the mandrel helps exert more force than the conventional puller with the thicker thread.

Made for professional by professionals. Make no mistake these are professional set of pullers and would grace ant mechanic toolbox.

To help show the quality and size of this puller set, they weigh nearly 3.5Kgs

Specification

• 2 and 3 leg position yoke

• Maximum depth 7 inches

• Drop forged

• Extra fine thread

• Internal and external pulls

• Professionally manufactured

£32.99 PAPS02

p&p £8.50 £41.49

Professional 2 and 3 Leg Fine Thread 4'' Inch Pulls with reversible legs for external and internal pulling

A very unique puller. Not only 2 and 3 leg position it is also reversible for both internal and external pulls.

Manufactured for drop forged steel of the highest quality. The extra fine thread on the mandrel helps exert more force than the conventional puller with the thicker thread.

Made for professional by professionals. Make no mistake these are professional set of pullers and would grace ant mechanic toolbox.

To help show the quality and size of this puller ser they weigh nearly 2.0Kgs

Specification

• 2 and 3 leg position yoke

• Maximum depth 4 inches

• Drop forged

• Extra fine thread

• Internal and external pulls

• Professionally manufactured

£22.99 PAPS03

p&p £7.00 Total £29.99

2-Leg Gear Puller Set

Set of three heavy duty gear pullers with 2 legs. Made from forged steel with chrome plating.

There are three sizes: 4", 6" and 10". Each puller has a long bolt with a pointed tip on one end and a hex grip on the handle for turning by hand or with a tool.

The claw legs are reversible for internal and external pulls, and may be adjusted using the nuts and bolts.

Dimensions

4" puller:
• Total length of claw legs: 4.5"
• Length of bolt beneath yoke: 3.5"
• Claw feet protrude inwards by 3/8"

6" puller:
• Total length of claw legs: 6.5"
• Length of bolt beneath yoke: 5 1/8"
• Claw feet protrude inwards by 1/2"

10" puller:
• Total length of claw legs: 11"
• Length of bolt beneath yoke: 8 3/4"
• Claw feet protrude inwards by 5/8"

Specification

• Forged steel pullers in 3 sizes
• Heavy duty construction
• Chrome plated
• 4", 6" and 10" long

£13.99 PAPS05

p&p £8.50 Total £22.49

25pc 10 Ton Professional Hydraulic Gear Puller Set

Forged steel yoke and arms. 10 Ton hydraulic power unit with tommy bar. Suitable for pulling hubs, flanges, gears and bearings. Supplied with three 3-position puller arms and three sets of extension plates, supplied in carry-case.

This set weighs nearly 18kgs to help substaniate its quality and durability

This set contains the following

1x 10 Ton Hydraulic Ram
1 Set (3) 100mm Legs
1 Set (3) 150mm Legs
1 Set (3) 200mm Legs
1 Twin Head
1 Triple Head
Extension Rods 25 x 50mm, 25 x 100mm,
1pc Main Rod 200mm x 1.75pc x 4pcs,
Beam Seperator 75-105mm
Bolt 5/8
Ram Nut
Spare hydraulic rams available if required

Comes with a free blow moulded case to protect the set when in transit

£119.99 PAPS04

p&p £8.50 Total £128.49

6 Way 10 Ton Hydraulic Puller

Forged steel 2-way yoke allows this set to be used as a 2 or 3 legged puller. Comes with a 10 Ton Hydraulic ram with Tommy bar to make brearing, hubs and gear a whole lot easier.

Suitable for pulling hubs, flanges, gears and bearings.

Contents:

Hydraulic pump (10 Ton)
3 puller legs
6 nuts and washers
6 link plates
2/3 leg puller yoke
Nose adaptor

Specification

Puller Type: 2 Legged

Size: Spread / Reach:

100mm 50-100 / 0-100mm
150mm 75-150 / 0-150mm
200mm 100-200 / 0-200mm
250mm 150-250 / 0-250mm

Puller Type: 3 Legged

Size: Spread / Reach:

100mm 50-100 / 0-100mm
150mm 75-150 / 0-150mm
200mm 100-200 / 0-200mm
250mm 150-250 / 0-250mm

Comes with a free protective blow moulded case to protect the wrench when in transit

£62.99 PAPS06

p&p £8.50 Total £71.49