INTREPID Multimeters & Testers

Digital Tester

Direct Test and Breakpoint Detection
Detects AC Voltage
Neutral Check Earth
Connection Check
LCD Display
Test Range 12 - 250 Volts AC and DC
Maximum Insulation Thickness: 2mm

£3.80 MmMT01

p&p £1.49 Total £5.29

Multi Function Electronic Tester

Ideal and handy for your home / DIY

• Detects AC Voltage, TV safety distance, Microwave
• Checks wrong connection
• Checks home appliances such as your iron
• Electronic Component and Auto Bule Check
• Requires 2 x 1.5V Alkaline or Mercury Type Batteries (Included)
• Battery Life: Minimum 5 hours of continuity operation when at "O" position.

Advanced Tester allows you to safely, quickly and accurately check for the following main features:

• AC Voltage Test: Contact method from 70-250VAC. Non-Contact method from 70-10.000VAC
• DC Voltage Test: Up to 250VDC
• Polarity Test: 1.2V - 36VDC
• Continuity Test: "O"=0-5M, "L"=0-50M, "H"=0-100M

£4.80 MMT02

p&p £1.50 Total £6.30

Professional Refractometer

It’s commonly used in auto repair, garage and auto related industry. It is designed for testing the concentration of the battery fluids, antifreeze liquid and cleaning fluids. It can be used for testing the strength of electrolyte solution batteries too. From the testing result you can estimate at what temperature the fluid would be frozen for both propylene glycol and ethylene glycol.

For a spot on accurate reading or compiling a report this is a must

Specifications:

Range:
Ethylene Glycol: -50C – 0C;
Propylene Glycol: -50C – 0C;
Battery Acid: 1.100-1.400sg

Min.Div.:
Ethylene Glycol: 5C
Propylene Glycol: 5C
Battery Acid: 0.01sg

Accuracy:
Ethylene Glycol:+-5C;
Propylene Glycol: +-5C;
Battery Acid: +-0.01sg

Includes

• Refractometer

• Pipette for picking droplets

• Cleaning cloth

• Sponge lined case

£52.99 MMT06

p&p £4.00 Total £56.99

Professional Quality Hand Held Large LCD Display Multimeter

A professional digital multimeter hand held

• Auto Power Off (15 minutes)
• Big Liquid Crystal Display 3.5 x 6 cm
• Low Battery Indicator
• Continuity bleep
• Overlaod Protection
• High Impact Rubber Case with stand
• Probes and Leads
• Standard 9v Battery Supplied

Specifications:

• DCV: 200mV-20-200-1000V ....................+/- 0.5%
• ACV: 2v-20v-200 to 700V .......................+/- 0.8%
• DCA:2m-20-200-20A................................+/-0.8%
• ACA: 20m-200m-20A................................+/-1.2%
• Ohms:200-2k-20k-200k-2M-20M-20M......+/-0.8%
• CAP: 200Pf-20n-200n-20Mf...................+/-0.2.5%
• Transistor Test: 1b 10MA Vce 3V
• Diode:3V/0.8Ma
• Dimensions: 200mm (8 inches) L, 95 mm (3 3/4 inches) W, 52mm (2 inches) H approx

£18.99 MMT04

p&p £4.99 Total £23.98

Professional 9 Piece Injection Systems Testing Set

Every mechanic, technician or Diy enthusiast should have a set of these

These are for checking electrical system to injectors and the electronic control module for the idle air-control (IAC) motor on GM vehicles.

How to use

Checks fuel injector signal faults fast and easily. Disconnect electrical harness from injector. Plug noid light into harness. Turn engine on.

Compatible with the following

Ford TBI
GEO TBI
Bosch PFI
GM TBI
GM PFI
GM SCPI
GM multec 2
GM-1987
GM-1982 vehicles

Includes

1 x GEO TBI
1 x GM SCPI
1 x GM MULTEC 2
1 x BOSCH PFI
1 x FORD TBI
1 x GM PFI
1 x GM-1987
1 x GM-1982
1 x AC Signal Tester
1 x GM No.700 TBI/PFI

£21.99 MMT03

p&p £3.00 Total £24.99