INTREPID More must haves

More must haves

Longhorn 2000 Lbs 12v Reversible Winch

All purpose winch for most horizontal winching Boats / Tree Stumps / Vehicles etc.

This 12 volt Winch and attachments weighs nearly 7.5Kgs to help substantiate its quality and durability.

Performance Specifications:

• Gear Reduction Ratio: 153:1
• Motor: Permanent Magnet DC 12Volt Motor with 0.85hp output
• Overall Dimensions: 285mm (L) X 105mm (W) X 105mm (H)
• Drum Size: 31.5mm (D) X 73mm (L)
• Cable: 15m (Length) x 4mm (diameter)
• Rolling: 2000lbs
• Comes with remote cable for forward and reverse - pully and a hook

£63.99 MUT01

p&p £8.50 Total £72.49

Longhorn 8000/9000 lb Winch Fairlead Rollers

Never get stuck again! To used with any of the Winchs also for sale on our site. A must when pulling at tight angles and uphills.

This Set of Winch Rollers weighs 4.5 Kgs to help substantiate its quality and durability.

Secifications:

• Reduces cable wear, especailly on pulls at severe angles.
• Rugged Construction
• Heavy-Duty Roller Fairlead
• 8000/9000lb

£28.99 MUT02

p&p £8.50 Total £37.49

Professional 8 Piece Valve Spring Compressor Set

Ideal to use on car, van and many motorbike applications.

The different adaptors make this set one of the most versitile on the market and will virtually remove and compress on any cylinder head.

Specifaction

• 16mm adaptor open sided

• 19mm adaptor open sided

• 23mm adaptor open sided

• 25mm adaptor open sided

• 30mm adaptor open sided

• Spring compressor body

• Extension

• Heavt duty blow moulded case

£24.99 MUT05

p&p £6.99 Total £31.98

16 piece Slide Hammer Set

Another must have for the professional or DIYer

Converts into a 2 or 3 Jaw Internal/External Puller for reaching tight areas

This slide hammer and attachments weighs nearly 7Kgs to help substantiate its quality and durability.

The set includes:

• Combination Puller with 5lb Malleable Steel Slide Hammer

• Drop Forged Steel Pullers & Attachments

• Fully Hardened Shaft and Accessories

• Multi-functional Attachments

• Internal 2-Jaw Puller

• External 2-Jaw Puller

• Internal 3-Jaw Puller

• External 3-Jaw Puller

• Pull Hook

• Dent Puller

• Rear Axle Puller

• Grip Wrench Adaptor

£28.99 MUT04

p&p £8.50 Total £37.49

Professional 11 Piece Bearing Race / Seal Driver Kit

Professional quality with handle and nine metal collars (40-81mm diameter) .

Provide the correct size driver for 99%, bearings, bush and oil seal installations. The reverse side of the
collar can also be used to drive seals. Supplied with a strong blow mould case.

Ideal for car, commerical motorbike or any application that has bearings or seals.

Always drive that bearing in square and flush first time.

Specification

• 9 x Aluminium drive flanges size: 40, 45, 50, 59, 63, 65, 72, 76 and 81mm
• Aluminium mandrel drive

£34.99 MUT07

p&p £5.99 Total £40.98

19 Piece Left & Right Hand Brake Caliper Piston Rewind Tool Kit

Ever Wanted A Professional, High Quality Set Of Brake Piston Wind Back Tools. Well Here Is One Of The Best On The Market As It Can Be Used On Both Right And Left Handed Assemblies

This Brake Piston wind back set weighs nearly 2.6 kgs to help sustaniate its quality and durability. Excellent professional quality.

Please look at the the picture we have taken to see the quality of this set.

Features

• The Set Of Adapters Are Suitable For A Wide Range Of Vehicle Applications.
• This Is Suitable For Push Back And Wind Back Brake Pistons.
• It Includes Left And Right Handed Thrust Bolt Assemblies.
• The Left Handed Thrust Bolts Are Suitable For Ford, Citroen And Renault Applications.
• The Precision Made Adapter Plates With Thrust Bolt Assembly and Reaction Plate, Helps Prevent Damage to Pistons and Seals.
• The Updated Adapter Set Is Suitable For A Wide Variety Of Vehicles.

See the List Below:

Alfa Romeo, Audi, BMW, Citroen, Fiat, Ford, GM, Honda, Jaguar, Mazda, Mercedes, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Seat, Skoda, Subaru, Toyota, Vauxhall, Volkswagen, Volvo, Land Rover And 4 Wheel Drive Vehicles.

£58.99 MUT06

p&p £8.50 Total £64.49

Longhorn Heavy Duty 4000Lbs 12v Reversible Winch

Longhorne the name you associate with strong reliable winches

All purpose winch for most horizontal winching Boats / Tree Stumps / Vehicles etc.

This superb 12 volt Winch and attachments weighs over 15Kgs to help substantiate its quality and durability.

Performance Specifications:

• Maximum Load: 1814kgs / 4000Lbs
• Gear Reduction Ratio: 423:1
• Motor: Permanent Magnet DC 12Volt Motor with 1.80 hp output
• Overall Dimensions: 323mm (L) X 142mm (W) X 161mm (H)
• Drum Size: 45mm (D) X 76mm (L)
• Cable: 16m (Length) x 5.4mm (diameter)
• Rolling: 4000Lbs
• Comes with remote cable for forward and reverse and its own fairlead

£163.99 MUT03

p&p £8.50 Total £172.49

Macpherson Multi Use Spring Compressor Set

Compresses all types of MacPherson style coil springs front and rear.

Includes three sets of jaws: 2 each of, 65-125mm, 88-160mm and 126-212mm for springs found in most vehicles with Macpherson
struts.

Not designed for use with impact wrench. Hand ratchet only.

We have not heard of a strut that this kit will not do.

Approved safety disassembling McPherson struts involves the application of extreme forces it can be a

risky undertaking. With our professional grade coil spring compressor risk of accident is greatly reduced.

The coil spring compressors are manufactured under very strict quality control and are approved to

endure extremely high loads.

To guarantee top quality only the best materials have been used in the manufacture of this professional spring compressor.

This of professional spring compressor weighs nearly 15kgs to help substantiate their quality.

Advantages

Safest way to change coil springs

Jaws are easily changed

Interchangeable jaws

Suitable for conical springs

Jaws with safety lip locks the spring in place during compression

Shear pin to prevent overload

Jaws secured with bolts

Range of Vehicles

Alfa Romeo

Audi
BMW - E31, E32, E34, E36, E38, E52, E60, E61, E63, E64,E65, E66, E67
Chrysler

Citroen

Daihatsu

Daewoo

Fiat

Ford

Honda

Hyundai

Jaguar

Jeep

Kia

Lancia

Mazda
Mercedes Benz C/E Class

Mitsubishi
Nissan

Opel

Peugeot

Renault
Mini

R50, R52, R53

Porsche
Rover
Saab
Seat
Skoda

Subaru

Toyota

Vauxhall

Volvo

VW

Specification

Compressor

Includes three sets of jaws
65-125mm x 2

88-160mm x 2

126-212mm x 2

Adjustment block

Bespoke blow moulded case

£229.99 MUT10

p&p £8.50 Total £238.49

Professional 19 Pc Sump, Axle, Gearbox Plug Removal Set

This is the most comprehensive set known to be available.

Made from pure Chrome Vanadium with a satin finish and presented in its own strong metal case the lockable clasp.

Looks very professional whilst fits nearly every application known.

It weighs 1.6Kgs to help show it's quality and substance.

Specification

Master Drain Plug Key Set - 19 Piece

All 3/8 Drive

Hex

8, 9, 10, 12, 17 and 17mm Hex/Allen key

Square

5/16', 3/8'', and 7, 8, 10, 11, 12, 13, 14mm

1 x Triangle

1 x Socket 10mm female square

1 x 3/8 Breaker bar with cushioned handle

1 x metal box with lockable clasp

£28.99 MUT09

p&p £6.00 Total 34.99

Professional Universal Twin Cam Locking Tool Timing Kit

Special design to lock twin camshafts to timing marks during timing belt replacement. Being universal now you only need one tool to do all twin cam. A versitli tool that can also be used to lock a diesel fule pump to the camshmshaft sprocket.

Specification

• Fit onto sprockets and extends to lock into sprocket teeth.

• Adjustable arms to fit various diameters and tooth pitch.

• Also suitable for locking between cam and diesel injection pump sprockets.

• One man operation

£28.99 MUT13

p&p £3.50 Total £32.49

Professional Door Trim and Door Service Tool Kit

A perfect set for removing door trims and upholstry. For on cars, commercials, 4x4 , Caravans, Trucks, Boats.

Specification

• 1 X Door lock clip removal
• 1 X U slot
• 1 X V slot
• 1 X Hooked deep V slot
• Egernomic nylon handles
• Black finish

£12.75 MUT12

p&p £4.50 Total £17.25

Professional Exhaust Pipe Chain Cutter

A perfect to for cutting most types of pipework. Stainless steel, mild steel, galvanised steel, Copper and Aluminum pipes

Ideal for working in tight places. Small working angle thanks to alternating movement backwards/forwards. For cutting pipes with wall thicknesses up to 3 mm and diameters from 19-83 mm.

Cutting chain with specially hardened pinion-type cutters. Grip technology means the pincers can be used with minimal exertion.

With the cutting wheels on every piviot point this chain cutter can cut a pipe with only a quater turn.

Keeping the cutting discs well oiled for the most effective cutting. Will cut the pipe cleanly and straight every time.

Specification

3/4'' to 3 1/4'' (19mm to 83mm)

Chain linked prescision cutters

Cushioned grip

Cuts pipe up to 3mm

Professional tool

Storage pouch

£29.99 MUT11

p&p £4.50 Total £34.49