INTREPID Engineering, Measuring

13 Blade Metric Feeler Gauge with Storage Pouch

For use in the Automotive industry and any that needs an accurate measurment

As with any Feeler Gauge you can combine any of these blades to get the correct measurement

Specification

Carbon Steel 0.05 - 1.0mm
13mm (1/2'') W, 100mm (4") Long blades.
Hardened & polished

Individually marked with size

13 Blades sizes are

0.05, 0.1, 0.15, 0.2, 0.25, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, &1mm

£2.99 EMT01

p&p £1.25 Total £4.24

Dial Gauge / Dial indicator

The dial indicator has a 0-10mm dial in 0.01mm increments. The bezel around the front rim can be rotated, carrying the scale with it - perfect for aligning the needle to point to zero.

There are two circlips on the dial that can be moved independently for use as min/max range indicators.

The dial indicator has a bezel lock screw to tighten the bezel into position, and a puller for lifting the plunger.

On the back of the dial indicator is a tab with a hole for mounting onto the magnetic base.

Specification

Dial diameter 57mm (2.25"); plunger travel 12mm (0.5").

0-10mm dial in 0.01mm increments

£13.99 EMT02

p&p £2.50 Total £16.49

Magnetic DTI Stand for Dial Gauge

The dial indicator is supplied with a magnetic base stand. Fitting the dial indicator to the stand provides a motionless and stable means of measuring runout.

The solidly constructed base is easily adjustable and has a fine adjustment feature on the boom arm.

For added stability, the magnetised base grips solidly to any ferrous metal surface and has a 60kg pull. The magnet can be turned on and off with the switch.

The base is V-shaped for positioning on curved or cylindrical surfaces.

Total height: 23cm (9"). Height of vertical arm: 17.5cm (7.75"). Boom arm: 15cm (6").

Specification

• Magnetic base with fine adjustment
• Magnet has an 60kg pull
• On/off switch for easy positioning

£19.99 EMT03

p&p £7.00 Total £26.99

Professional Electronic Digital Vernier Gauge 234mm with LCD display

Made out of surgical grade stainless steel. Can be used to measure internal, external and height dimensions with extreme accurately.Linear capacitive measuring system. Large, Clear Digital Readout. Can be set to zero setting at any position within measuring range. With a small locking thumb screw which locks the jaws in place. Very handy conversion chart at the back. Very Slim & Lightweight so easy to carry anywhere. One button changes unit from Metric to Inch and vice versa (true measurement, not calculated)

Measure not only thickness, plus inner width, stepping, differential, and depth up to 6 inch

Not to be confused with the smaller version. This is for professional use

Specification:

Overall Length: 234mm

LCD Display Size 40mm x 15mm

Measuring range: 0–150 mm/ 0–6 in

Accuracy: + 0.02 mm/ 0.001 in, (<100 mm), + 0.03mm/0.001 in. (>100 – 150 mm)

Resolution: 0.01mm/ 0.0005 in

Repeatability: 0.01mm/ 0.0005 in

Maximum measurement speed: 1m/s

Power: 1 x 1.5V SR44 (silver oxide cell) battery Battery life:

1 year for continuous usage/ 3 years under normal operation